MRC 5207MZZG

Min. Order: 1 Piece

Bearing Price

$581.77 (Price for reference only.)
IN STOCK 500+ pcs.with 3 to 7 days delivery time

Our email: [email protected]

Bearing Information
Weight1.051 lb
OEMOEM P/N
Bearing manufacturers
Manufacturer Part Number
MRC 5207MZZG
Item Details
Manufacturer:MRC Bearing Service
Weight:1. 051 lbs.
Product Name:5200-M Light Series Bearing
Description:35 mm ID x 72 mm OD x 1 1/16" Wide; Double Sealed; With Snap Ring; Maximum Capacity; Double Row Ball Bearing
Specifications
Inch/MetricMetric Bore
Bore TypeRound Bore
I. D.35 mm
O. D. [Min]
O. D. [Max]
O. D.72 mm
Width [Min]
Width [Max]
Width26. 9875 mm
EnclosureDouble Sealed
Rows of BallsDouble
MaterialSteel
O. D. TypeStraight w/ Snap Ring
Bearing TypeAngular Contact
PrecisionStandard
Radial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]
Ambient Temperature Range [Max]
Ball MaterialSteel
Cage TypeMetal
CapacityMaximum Capacity
Contact Angle30°
Guide Type
Lubrication
Outer Ring Width1 1/16 in
Precision LevelStandard (ABEC 1)
Preload LevelNone
Seal MaterialRubber
Seal TypeContact Seals
Seal Width
Dynamic Load Rating8800 lbf
Static Load Rating [Max]8210 lbf
Ball Dia.
Bearing Design
Bore B
Cage MaterialSteel
Collar No.
Collar O. D.
Collar Width
Corner Radius [Min]
Eccentric Collar Offset
Fillet Radius1 mm
Flange O. D. [Max]
Flange O. D.
Flange Width [Max]
Flange Width
Flush Ground
Housing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]
Housing Shoulder Diameter
Industry Standard Part #
Inner Ring O. D.
Inner Ring Offset
Inner Ring Width1 1/16 in
Internal Design
Limiting Speed
Limiting Speed - Grease6000 rpm
Limiting Speed - Oil8000 rpm
Limiting Speed - Sealed6000 rpm
Locking DeviceNo Locking Device
Lube Hole Center
LubricantChevron SRI-2
Misalignment Range
No. in SetSingle Bearing
No. of Balls
O. D. (B)
Outer Ring
Outer Ring Inner Diameter
Outer Ring Size
Peak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)
Pre Lubricant
Preload Amount
Radial Internal ClearanceNormal
Radial Load Rating [Max]
Radial Rigidity (lbf/µm)
Reference Speed
Seal O. D.
Seal Protection Width
Seating Washer
Series
Set Screw Offset
Set Screw Size
Shaft Shoulder Diameter [Min]
Shaft Tolerance
Snap RingWith Snap Ring
Snap Ring O. D.
Snap Ring Offset
Snap Ring Thickness
Special Features
Stamping
Static Thrust Load Rating [Max]
Temperature Range [Min]
Temperature Range [Max]
Use With
Product Information
Applications
  • Used with heavy radial loads, two-directional thrust loads or a combination of both
  • Thrust load should be carried on the nonfilling notch row
  • Moderate thrust load is permissible on the filling notch row
Features
  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction, with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring