| Weight | 1.113 lb |
|---|---|
| OEM | OEM P/N |
| Manufacturer | Part Number |
|---|---|
| MRC | 1210E |
| Manufacturer: | MRC Bearing Service |
|---|---|
| Weight: | 1. 113 lbs. |
| Product Name: | 1200 Series Self-Aligning Ball Bearing |
| Description: | 50 mm ID x 90 mm OD x 20 mm Wide; Open; No Snap Ring; Double Row Self-Aligning Steel Bearing |
| Inch/Metric | Metric Bore |
|---|---|
| Bore Type | Round Bore |
| I. D. | 50 mm |
| O. D. [Min] | |
| O. D. [Max] | |
| O. D. | 90 mm |
| Width [Min] | |
| Width [Max] | |
| Width | 20 mm |
| Enclosure | Open |
| Rows of Balls | Double |
| Material | Steel |
| O. D. Type | Straight |
| Bearing Type | Self-Aligning |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| Ambient Temperature Range [Min] | |
| Ambient Temperature Range [Max] | |
| Ball Material | Steel |
| Cage Type | Metal |
| Capacity | Standard Capacity |
| Contact Angle | N/A |
| Guide Type | |
| Lubrication | |
| Outer Ring Width | 20 mm |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Seal Material | None |
| Seal Type | Unsealed |
| Seal Width | |
| Dynamic Load Rating | 5960 lbf |
| Static Load Rating [Max] | 2060 lbf |
| Ball Dia. | |
| Bearing Design | |
| Bore B | |
| Cage Material | Steel |
| Collar No. | |
| Collar O. D. | |
| Collar Width | |
| Corner Radius [Min] | |
| Eccentric Collar Offset | |
| Fillet Radius | 1 mm |
| Flange O. D. [Max] | |
| Flange O. D. | |
| Flange Width [Max] | |
| Flange Width | |
| Flush Ground | |
| Housing Shoulder Diameter [Min] | |
| Housing Shoulder Diameter [Max] | |
| Housing Shoulder Diameter | |
| Industry Standard Part # | |
| Inner Ring O. D. | |
| Inner Ring Offset | |
| Inner Ring Width | 20 mm |
| Internal Design | |
| Limiting Speed | |
| Limiting Speed - Grease | 7000 rpm |
| Limiting Speed - Oil | 8500 rpm |
| Limiting Speed - Sealed | |
| Locking Device | No Locking Device |
| Lube Hole Center | |
| Lubricant | Oil Preservative |
| Misalignment Range | |
| No. in Set | Single Bearing |
| No. of Balls | |
| O. D. (B) | |
| Outer Ring | |
| Outer Ring Inner Diameter | |
| Outer Ring Size | |
| Peak Running Torque (mg-mm) | |
| Peak Starting Torque (mg-mm) | |
| Pre Lubricant | |
| Preload Amount | |
| Radial Internal Clearance | Normal |
| Radial Load Rating [Max] | |
| Radial Rigidity (lbf/µm) | |
| Reference Speed | |
| Seal O. D. | |
| Seal Protection Width | |
| Seating Washer | |
| Series | |
| Set Screw Offset | |
| Set Screw Size | |
| Shaft Shoulder Diameter [Min] | |
| Shaft Tolerance | |
| Snap Ring | No Snap Ring |
| Snap Ring O. D. | |
| Snap Ring Offset | |
| Snap Ring Thickness | |
| Special Features | |
| Stamping | |
| Static Thrust Load Rating [Max] | |
| Temperature Range [Min] | |
| Temperature Range [Max] | |
| Use With | |
| Applications |
|
|---|---|
| Features |
|
Looking for high-quality bearings at a great price? Look no further! We have the MRC 1210E bearing in stock and ready to ship to you within 3 to 7 days. With over 500 pieces available, you can order as few as 1 piece at the unbeatable price of just $72.23 per piece. Don't miss out on this fantastic deal – get the bearings you need today and keep your machinery running smoothly. Read on to learn more and make your purchase now!
We specializes in providing MRC 1210E Bearings for many years, MRC 1210E has a large number of stock, a number of 1210E Bearings MRC suppliers and brand agency cooperation to meet your different 32307-B quality and different brand needs. Get detailed parameters can be sent to e-mail inquiry, and if you have any questions about this 32307-B bearing.
Manufacturer MRC 1210E bearing with high quality. MRC 1210E Bearing - 1210E SELF ALIGNING BALL BRGS. We has been built up long-term cooperation with MRC company, could make a bulk order of the bearings Which MRC 1210E is the most authentic, must choose BEARING POWER, what a whole variety, reasonable price, guaranteed quality, prompt delivery via Global express..1986 In Global stock for delivery within 3 - 7 working days. Easy ways to get the answers you need.
