MRC 310S

Min. Order: 1 Piece

Bearing Price

$76.81 (Price for reference only.)
IN STOCK 500+ pcs.with 3 to 7 days delivery time

Our email: [email protected]

Bearing Information
Weight2.341 lb
OEMOEM P/N
Bearing manufacturers
Manufacturer Part Number
MRC 310S
Item Details
Manufacturer:MRC Bearing Service
Weight:2. 341 lbs.
Product Name:300-S Medium Series Ball Bearing
Description:50 mm ID x 110 mm OD x 27 mm Wide; Open; No Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/MetricMetric Bore
Bore TypeRound Bore
I. D.50 mm
O. D. [Min]
O. D. [Max]
O. D.110 mm
Width [Min]
Width [Max]
Width27 mm
EnclosureOpen
Rows of BallsSingle
MaterialSteel
O. D. TypeStraight
Bearing TypeRadial
PrecisionStandard
Radial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]
Ambient Temperature Range [Max]
Ball MaterialSteel
Cage TypeMetal
CapacityStandard Capacity
Contact Angle
Guide Type
Lubrication
Outer Ring Width27 mm
Precision LevelStandard (ABEC 1)
Preload LevelNone
Seal MaterialNone
Seal TypeUnsealed
Seal Width
Dynamic Load Rating13900 lbf
Static Load Rating [Max]8540 lbf
Ball Dia.
Bearing Design
Bore B
Cage MaterialSteel
Collar No.
Collar O. D.
Collar Width
Corner Radius [Min]
Eccentric Collar Offset
Fillet Radius2 mm
Flange O. D. [Max]
Flange O. D.
Flange Width [Max]
Flange Width
Flush Ground
Housing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]
Housing Shoulder Diameter
Industry Standard Part #
Inner Ring O. D.
Inner Ring Offset
Inner Ring Width27 mm
Internal Design
Limiting Speed
Limiting Speed - Grease6300 rpm
Limiting Speed - Oil7500 rpm
Limiting Speed - Sealed4300 rpm
Locking DeviceNo Locking Device
Lube Hole Center
LubricantOil Preservative
Misalignment Range
No. in SetSingle Bearing
No. of Balls
O. D. (B)
Outer Ring
Outer Ring Inner Diameter
Outer Ring Size
Peak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)
Pre LubricantNone
Preload Amount
Radial Internal ClearanceNormal
Radial Load Rating [Max]
Radial Rigidity (lbf/µm)
Reference Speed
Seal O. D.
Seal Protection Width
Seating Washer
Series
Set Screw Offset
Set Screw Size
Shaft Shoulder Diameter [Min]
Shaft Tolerance
Snap RingNo Snap Ring
Snap Ring O. D.
Snap Ring Offset
Snap Ring Thickness
Special Features
Stamping
Static Thrust Load Rating [Max]
Temperature Range [Min]
Temperature Range [Max]450 °F
Use With
Product Information
Applications
  • Used with heavy radial loads, two-directional thrust loads or a combination of both
Features
  • Single-row radial deep groove bearing with no filling notches
  • Can carry significant radial loads
  • Can carry substantial thrust loads in either direction, even at very high speeds
  • Supplied with a pressed steel cage