MRC 405M

Min. Order: 1 Piece

Bearing Price

$269.67 (Price for reference only.)
IN STOCK 500+ pcs.with 3 to 7 days delivery time

Our email: [email protected]

Bearing Information
Weight1.275 lb
OEMOEM P/N
Bearing manufacturers
Manufacturer Part Number
MRC 405M
Item Details
Manufacturer:MRC Bearing Service
Weight:1. 275 lbs.
Product Name:400-M Heavy Series Ball Bearing
Description:25 mm ID x 80 mm OD x 21 mm Wide; Open; No Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/MetricMetric Bore
Bore TypeRound Bore
I. D.25 mm
O. D. [Min]
O. D. [Max]
O. D.80 mm
Width [Min]
Width [Max]
Width21 mm
EnclosureOpen
Rows of BallsSingle
MaterialSteel
O. D. TypeStraight
Bearing TypeRadial
PrecisionStandard
Radial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]
Ambient Temperature Range [Max]
Ball MaterialSteel
Cage TypeMetal
CapacityMaximum Capacity
Contact Angle
Guide Type
Lubrication
Outer Ring Width21 mm
Precision LevelStandard (ABEC 1)
Preload LevelNone
Seal MaterialNone
Seal TypeUnsealed
Seal Width
Dynamic Load Rating8050 lbf
Static Load Rating [Max]5270 lbf
Ball Dia.
Bearing Design
Bore B
Cage MaterialSteel
Collar No.
Collar O. D.
Collar Width
Corner Radius [Min]
Eccentric Collar Offset
Fillet Radius1 1/2 mm
Flange O. D. [Max]
Flange O. D.
Flange Width [Max]
Flange Width
Flush Ground
Housing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]
Housing Shoulder Diameter
Industry Standard Part #
Inner Ring O. D.
Inner Ring Offset
Inner Ring Width21 mm
Internal Design
Limiting Speed
Limiting Speed - Grease7700 rpm
Limiting Speed - Oil9400 rpm
Limiting Speed - Sealed
Locking DeviceNo Locking Device
Lube Hole Center
LubricantOil Preservative
Misalignment Range
No. in SetSingle Bearing
No. of Balls
O. D. (B)
Outer Ring
Outer Ring Inner Diameter
Outer Ring Size
Peak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)
Pre Lubricant
Preload Amount
Radial Internal ClearanceNormal
Radial Load Rating [Max]
Radial Rigidity (lbf/µm)
Reference Speed
Seal O. D.
Seal Protection Width
Seating Washer
Series
Set Screw Offset
Set Screw Size
Shaft Shoulder Diameter [Min]
Shaft Tolerance
Snap RingNo Snap Ring
Snap Ring O. D.
Snap Ring Offset
Snap Ring Thickness
Special Features
Stamping
Static Thrust Load Rating [Max]
Temperature Range [Min]
Temperature Range [Max]450 °F
Use With
Product Information
Caution

Not to be used where only thrust loads are present

Applications
  • Used with exremely heavy radial loads, or a combination of radial load is predominant
Features
  • Maximum radial load-carrying capacity
  • Ability to carry heavy combined radial and thrust loads
  • Designated as the notched type because it has a filling notch on one side of the inner and outer rings
  • Normally furnished with ABMA CO radial clearance
  • Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
  • Single-row maximum capacity fillig-notch bearings with bores ranging from 17 mm to 100 mm