5215MFF MRC Bearing

MRC 5215MFF

Min. Order: 1 Piece

Bearing Price

$314.89 (Price for reference only.)

IN STOCK 500+ pcs.with 3 to 7 days delivery time

Our email: [email protected]

Bearing Information

Weight	4.601 lb
OEM	OEM P/N

Bearing manufacturers

Manufacturer	Part Number
MRC	5215MFF

Item Details

Manufacturer:	MRC Bearing Service
Weight:	4. 601 lbs.
Product Name:	5200-M Light Series Bearing
Description:	75 mm ID x 130 mm OD x 1 5/8" Wide; Double Shielded; No Snap Ring; Maximum Capacity; Double Row Ball Bearing

Specifications

Inch/Metric	Metric Bore
Bore Type	Round Bore
I. D.	75 mm
O. D. [Min]
O. D. [Max]
O. D.	130 mm
Width [Min]
Width [Max]
Width	41. 275 mm
Enclosure	Double Shielded
Rows of Balls	Double
Material	Steel
O. D. Type	Straight
Bearing Type	Angular Contact
Precision	Standard
Radial Internal Clearance Specification	Normal Clearance
Ambient Temperature Range [Min]
Ambient Temperature Range [Max]
Ball Material	Steel
Cage Type	Metal
Capacity	Maximum Capacity
Contact Angle	30°
Guide Type
Lubrication
Outer Ring Width	1 5/8 in
Precision Level	Standard (ABEC 1)
Preload Level	None
Seal Material	Metal
Seal Type	Non-Contact Seals
Seal Width
Dynamic Load Rating	24300 lbf
Static Load Rating [Max]	30800 lbf
Ball Dia.
Bearing Design
Bore B
Cage Material	Steel
Collar No.
Collar O. D.
Collar Width
Corner Radius [Min]
Eccentric Collar Offset
Fillet Radius	1 1/2 mm
Flange O. D. [Max]
Flange O. D.
Flange Width [Max]
Flange Width
Flush Ground
Housing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]
Housing Shoulder Diameter
Industry Standard Part #
Inner Ring O. D.
Inner Ring Offset
Inner Ring Width	1 5/8 in
Internal Design
Limiting Speed
Limiting Speed - Grease	3200 rpm
Limiting Speed - Oil	4300 rpm
Limiting Speed - Sealed	3200 rpm
Locking Device	No Locking Device
Lube Hole Center
Lubricant	Chevron SRI-2
Misalignment Range
No. in Set	Single Bearing
No. of Balls
O. D. (B)
Outer Ring
Outer Ring Inner Diameter
Outer Ring Size
Peak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)
Pre Lubricant
Preload Amount
Radial Internal Clearance	Normal
Radial Load Rating [Max]
Radial Rigidity (lbf/µm)
Reference Speed
Seal O. D.
Seal Protection Width
Seating Washer
Series
Set Screw Offset
Set Screw Size
Shaft Shoulder Diameter [Min]
Shaft Tolerance
Snap Ring	No Snap Ring
Snap Ring O. D.
Snap Ring Offset
Snap Ring Thickness
Special Features
Stamping
Static Thrust Load Rating [Max]
Temperature Range [Min]	-22 °F
Temperature Range [Max]	250 °F
Use With

Product Information

Applications	Used with heavy radial loads, two-directional thrust loads or a combination of both Thrust load should be carried on the nonfilling notch row Moderate thrust load is permissible on the filling notch row
Features	Has filling notches on one side to permit assembling the maximum number of balls into the bearing Contact angles converge outside the bearing All inner and outer rings have closure grooves Bearings may be equipped with seals, shields, snap rings or any combination Has very heavy radial capacity Thrust capacity in one direction, with the ability to accommodate light thrust load in the reversing direction One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring

Applications

Used with heavy radial loads, two-directional thrust loads or a combination of both
Thrust load should be carried on the nonfilling notch row
Moderate thrust load is permissible on the filling notch row

Features

Has filling notches on one side to permit assembling the maximum number of balls into the bearing
Contact angles converge outside the bearing
All inner and outer rings have closure grooves
Bearings may be equipped with seals, shields, snap rings or any combination
Has very heavy radial capacity
Thrust capacity in one direction, with the ability to accommodate light thrust load in the reversing direction
One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring

Message Us

Description

Looking for high-quality bearings at a great price? Look no further! We have the MRC 5215MFF bearing in stock and ready to ship to you within 3 to 7 days. With over 500 pieces available, you can order as few as 1 piece at the unbeatable price of just $314.89 per piece. Don't miss out on this fantastic deal – get the bearings you need today and keep your machinery running smoothly. Read on to learn more and make your purchase now!

We specializes in providing MRC 5215MFF Bearings for many years, MRC 5215MFF has a large number of stock, a number of 5215MFF Bearings MRC suppliers and brand agency cooperation to meet your different 32307-B quality and different brand needs. Get detailed parameters can be sent to e-mail inquiry, and if you have any questions about this 32307-B bearing.

Manufacturer MRC 5215MFF bearing with high quality. MRC 5215MFF Bearing - 5215MFF DOUBLE ROW BALL BRGS. We has been built up long-term cooperation with MRC company, could make a bulk order of the bearings Which MRC 5215MFF is the most authentic, must choose BEARING POWER, what a whole variety, reasonable price, guaranteed quality, prompt delivery via Global express..1986 In Global stock for delivery within 3 - 7 working days. Easy ways to get the answers you need.