MRC 200SZZST

Min. Order: 1 Piece

Bearing Price

$77.47 (Price for reference only.)
IN STOCK 500+ pcs.with 3 to 7 days delivery time

Our email: [email protected]

Bearing Information
Weight0.079 lb
OEMOEM P/N
Bearing manufacturers
Manufacturer Part Number
MRC 200SZZST
Item Details
Manufacturer:MRC Bearing Service
Weight:0. 079 lbs.
Product Name:200-S Light Series Ball Bearing
Description:10 mm ID x 30 mm OD x 9 mm Wide; Double Sealed; No Snap Ring; Single Row Radial Stainless Steel Bearing
Specifications
Inch/MetricMetric Bore
Bore TypeRound Bore
I. D.10 mm
O. D. [Min]
O. D. [Max]
O. D.30 mm
Width [Min]
Width [Max]
Width9 mm
EnclosureDouble Sealed
Rows of BallsSingle
MaterialStainless Steel
O. D. TypeStraight
Bearing TypeRadial
PrecisionStandard
Radial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]
Ambient Temperature Range [Max]
Ball MaterialStainless Steel
Cage TypeMetal
CapacityStandard Capacity
Contact Angle
Guide Type
Lubrication
Outer Ring Width9 mm
Precision LevelStandard (ABEC 1)
Preload LevelNone
Seal MaterialRubber
Seal TypeContact Seals
Seal Width
Dynamic Load Rating1140 lbf
Static Load Rating [Max]531 lbf
Ball Dia.
Bearing Design
Bore B
Cage MaterialSteel
Collar No.
Collar O. D.
Collar Width
Corner Radius [Min]
Eccentric Collar Offset
Fillet Radius0. 64 mm
Flange O. D. [Max]
Flange O. D.
Flange Width [Max]
Flange Width
Flush Ground
Housing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]
Housing Shoulder Diameter
Industry Standard Part #
Inner Ring O. D.
Inner Ring Offset
Inner Ring Width9 mm
Internal Design
Limiting Speed
Limiting Speed - Grease24000 rpm
Limiting Speed - Oil30000 rpm
Limiting Speed - Sealed17000 rpm
Locking DeviceNo Locking Device
Lube Hole Center
LubricantPolyurea Base
Misalignment Range
No. in SetSingle Bearing
No. of Balls
O. D. (B)
Outer Ring
Outer Ring Inner Diameter
Outer Ring Size
Peak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)
Pre Lubricant
Preload Amount
Radial Internal ClearanceNormal
Radial Load Rating [Max]
Radial Rigidity (lbf/µm)
Reference Speed
Seal O. D.
Seal Protection Width
Seating Washer
Series
Set Screw Offset
Set Screw Size
Shaft Shoulder Diameter [Min]
Shaft Tolerance
Snap RingNo Snap Ring
Snap Ring O. D.
Snap Ring Offset
Snap Ring Thickness
Special Features
Stamping
Static Thrust Load Rating [Max]
Temperature Range [Min]-22 °F
Temperature Range [Max]250 °F
Use With
Product Information
Applications
  • Used in applications with moderate to heavy radial loads, tow-directional thrust loads, or a combination of both
Features
  • Single-row radial deep groove bearing with no filling notches
  • Can carry significant radial loads
  • Can carry substantial thrust loads in either direction, even at very high speeds
  • Supplied with a pressed steel cage
  • Single-row radial conrad-type bearings made with bores from 10 mm to 120 mm