MRC 5207C

Min. Order: 1 Piece

Bearing Price

$55.47 (Price for reference only.)
IN STOCK 500+ pcs.with 3 to 7 days delivery time

Our email: [email protected]

Bearing Information
Weight1.025 lb
OEMOEM P/N
Bearing manufacturers
Manufacturer Part Number
MRC 5207C
Item Details
Manufacturer:MRC Bearing Service
Weight:1. 025 lbs.
Product Name:5200-C, 5200-SB Light Series Bearing
Description:35 mm ID x 72 mm OD x 1 1/16" Wide; Open; No Snap Ring; Standard Capacity; Double Row Ball Bearing
Specifications
Inch/MetricMetric Bore
Bore TypeRound Bore
I. D.35 mm
O. D. [Min]
O. D. [Max]
O. D.72 mm
Width [Min]
Width [Max]
Width26. 9875 mm
EnclosureOpen
Rows of BallsDouble
MaterialSteel
O. D. TypeStraight
Bearing TypeAngular Contact
PrecisionStandard
Radial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]
Ambient Temperature Range [Max]
Ball MaterialSteel
Cage TypeMetal
CapacityStandard Capacity
Contact Angle30°
Guide Type
Lubrication
Outer Ring Width1 1/16 in
Precision LevelStandard (ABEC 1)
Preload LevelNone
Seal MaterialNone
Seal TypeUnsealed
Seal Width
Dynamic Load Rating8480 lbf
Static Load Rating [Max]6180 lbf
Ball Dia.
Bearing Design
Bore B
Cage MaterialSteel
Collar No.
Collar O. D.
Collar Width
Corner Radius [Min]
Eccentric Collar Offset
Fillet Radius1 mm
Flange O. D. [Max]
Flange O. D.
Flange Width [Max]
Flange Width
Flush Ground
Housing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]
Housing Shoulder Diameter
Industry Standard Part #
Inner Ring O. D.
Inner Ring Offset
Inner Ring Width1 1/16 in
Internal Design
Limiting Speed
Limiting Speed - Grease6000 rpm
Limiting Speed - Oil8000 rpm
Limiting Speed - Sealed6000 rpm
Locking DeviceNo Locking Device
Lube Hole Center
LubricantOil Preservative
Misalignment Range
No. in SetSingle Bearing
No. of Balls
O. D. (B)
Outer Ring
Outer Ring Inner Diameter
Outer Ring Size
Peak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)
Pre Lubricant
Preload Amount
Radial Internal ClearanceNormal
Radial Load Rating [Max]
Radial Rigidity (lbf/µm)
Reference Speed
Seal O. D.
Seal Protection Width
Seating Washer
Series
Set Screw Offset
Set Screw Size
Shaft Shoulder Diameter [Min]
Shaft Tolerance
Snap RingNo Snap Ring
Snap Ring O. D.
Snap Ring Offset
Snap Ring Thickness
Special Features
Stamping
Static Thrust Load Rating [Max]
Temperature Range [Min]
Temperature Range [Max]450 °F
Use With
Product Information
Applications
  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction
Features
  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring
Compliances
  • Fully meets the requirements of American Petroleum Institute Specification 610