MRC 317SFF

Min. Order: 1 Piece

Bearing Price

$433.81 (Price for reference only.)
IN STOCK 500+ pcs.with 3 to 7 days delivery time

Our email: [email protected]

Bearing Information
Weight9.632 lb
OEMOEM P/N
Bearing manufacturers
Manufacturer Part Number
MRC 317SFF
Item Details
Manufacturer:MRC Bearing Service
Weight:9. 632 lbs.
Product Name:300-S Medium Series Ball Bearing
Description:85 mm ID x 180 mm OD x 41 mm Wide; Double Shielded; No Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/MetricMetric Bore
Bore TypeRound Bore
I. D.85 mm
O. D. [Min]
O. D. [Max]
O. D.180 mm
Width [Min]
Width [Max]
Width41 mm
EnclosureDouble Shielded
Rows of BallsSingle
MaterialSteel
O. D. TypeStraight
Bearing TypeRadial
PrecisionStandard
Radial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]
Ambient Temperature Range [Max]
Ball MaterialSteel
Cage TypeMetal
CapacityStandard Capacity
Contact Angle
Guide Type
Lubrication
Outer Ring Width41 mm
Precision LevelStandard (ABEC 1)
Preload LevelNone
Seal MaterialMetal
Seal TypeNon-Contact Seals
Seal Width
Dynamic Load Rating29900 lbf
Static Load Rating [Max]21700 lbf
Ball Dia.
Bearing Design
Bore B
Cage MaterialSteel
Collar No.
Collar O. D.
Collar Width
Corner Radius [Min]
Eccentric Collar Offset
Fillet Radius2 1/2 mm
Flange O. D. [Max]
Flange O. D.
Flange Width [Max]
Flange Width
Flush Ground
Housing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]
Housing Shoulder Diameter
Industry Standard Part #
Inner Ring O. D.
Inner Ring Offset
Inner Ring Width41 mm
Internal Design
Limiting Speed
Limiting Speed - Grease3600 rpm
Limiting Speed - Oil4300 rpm
Limiting Speed - Sealed2400 rpm
Locking DeviceNo Locking Device
Lube Hole Center
LubricantPolyurea Base
Misalignment Range
No. in SetSingle Bearing
No. of Balls
O. D. (B)
Outer Ring
Outer Ring Inner Diameter
Outer Ring Size
Peak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)
Pre Lubricant
Preload Amount
Radial Internal ClearanceNormal
Radial Load Rating [Max]
Radial Rigidity (lbf/µm)
Reference Speed
Seal O. D.
Seal Protection Width
Seating Washer
Series
Set Screw Offset
Set Screw Size
Shaft Shoulder Diameter [Min]
Shaft Tolerance
Snap RingNo Snap Ring
Snap Ring O. D.
Snap Ring Offset
Snap Ring Thickness
Special Features
Stamping
Static Thrust Load Rating [Max]
Temperature Range [Min]-22 °F
Temperature Range [Max]250 °F
Use With
Product Information
Applications
  • Used with heavy radial loads, two-directional thrust loads or a combination of both
Features
  • Single-row radial deep groove bearing with no filling notches
  • Can carry significant radial loads
  • Can carry substantial thrust loads in either direction, even at very high speeds
  • Supplied with a pressed steel cage