Min. Order: 1 Piece

Bearing Price

$94.84 (Price for reference only.)
IN STOCK 500+ pcs.with 3 to 7 days delivery time

Our email: [email protected]

Bearing Information
Weight1.559 lb
Bearing manufacturers
Manufacturer Part Number
Item Details
Manufacturer: MRC Bearing Service
Weight: 1. 559 lbs.
Product Name: 200-M Light Series Ball Bearing
Description: 55 mm ID x 100 mm OD x 21 mm Wide; Open; With Snap Ring; Single Row Radial Steel Bearing
Inch/Metric Metric Bore
Bore Type Round Bore
I. D. 55 mm
O. D. [Min]  
O. D. [Max]  
O. D. 100 mm
Width [Min]  
Width [Max]  
Width 21 mm
Enclosure Open
Rows of Balls Single
Material Steel
O. D. Type Straight w/ Snap Ring
Bearing Type Radial
Precision Standard
Radial Internal Clearance Specification Normal Clearance
Ambient Temperature Range [Min]  
Ambient Temperature Range [Max]  
Ball Material Steel
Cage Type Metal
Capacity Maximum Capacity
Contact Angle
Guide Type  
Outer Ring Width 21 mm
Precision Level Standard (ABEC 1)
Preload Level None
Seal Material None
Seal Type Unsealed
Seal Width  
Dynamic Load Rating 10900 lbf
Static Load Rating [Max] 9890 lbf
Ball Dia.  
Bearing Design  
Bore B  
Cage Material Steel
Collar No.  
Collar O. D.  
Collar Width  
Corner Radius [Min]  
Eccentric Collar Offset  
Fillet Radius 1 1/2 mm
Flange O. D. [Max]  
Flange O. D.  
Flange Width [Max]  
Flange Width  
Flush Ground  
Housing Shoulder Diameter [Min]  
Housing Shoulder Diameter [Max]  
Housing Shoulder Diameter  
Industry Standard Part #  
Inner Ring O. D.  
Inner Ring Offset  
Inner Ring Width 21 mm
Internal Design  
Limiting Speed  
Limiting Speed - Grease 5200 rpm
Limiting Speed - Oil 6300 rpm
Limiting Speed - Sealed  
Locking Device No Locking Device
Lube Hole Center  
Lubricant Oil Preservative
Misalignment Range  
No. in Set Single Bearing
No. of Balls  
O. D. (B)  
Outer Ring  
Outer Ring Inner Diameter  
Outer Ring Size  
Peak Running Torque (mg-mm)  
Peak Starting Torque (mg-mm)  
Pre Lubricant None
Preload Amount  
Radial Internal Clearance Normal
Radial Load Rating [Max]  
Radial Rigidity (lbf/µm)  
Reference Speed  
Seal O. D.  
Seal Protection Width  
Seating Washer  
Set Screw Offset  
Set Screw Size  
Shaft Shoulder Diameter [Min]  
Shaft Tolerance  
Snap Ring With Snap Ring
Snap Ring O. D.  
Snap Ring Offset  
Snap Ring Thickness  
Special Features  
Static Thrust Load Rating [Max]  
Temperature Range [Min]  
Temperature Range [Max] 450 °F
Use With  
Product Information

Not to be used where only thrust loads are present

  • Used in applications with heavy radial loads or a combination of radial and thrust loads where the radial load is predominant
  • Maximum radial load-carrying capacity
  • Ability to carry heavy combined radial and thrust loads
  • Designated as the notched type because it has a filling notch on one side of the inner and outer rings
  • Normally furnished with ABMA CO radial clearance
  • Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
  • Single-row maximum capacity filling-notch bearings