| Weight | 8.693 lb |
|---|---|
| OEM | OEM P/N |
| Manufacturer | Part Number |
|---|---|
| MRC | 221M |
| Manufacturer: | MRC Bearing Service |
|---|---|
| Weight: | 8. 693 lbs. |
| Product Name: | 200-M Light Series Ball Bearing |
| Description: | 105 mm ID x 190 mm OD x 36 mm Wide; Open; No Snap Ring; Single Row Radial Steel Bearing |
| Inch/Metric | Metric Bore |
|---|---|
| Bore Type | Round Bore |
| I. D. | 105 mm |
| O. D. [Min] | |
| O. D. [Max] | |
| O. D. | 190 mm |
| Width [Min] | |
| Width [Max] | |
| Width | 36 mm |
| Enclosure | Open |
| Rows of Balls | Single |
| Material | Steel |
| O. D. Type | Straight |
| Bearing Type | Radial |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| Ambient Temperature Range [Min] | |
| Ambient Temperature Range [Max] | |
| Ball Material | Steel |
| Cage Type | Metal |
| Capacity | Maximum Capacity |
| Contact Angle | 0° |
| Guide Type | |
| Lubrication | |
| Outer Ring Width | 36 mm |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Seal Material | None |
| Seal Type | Unsealed |
| Seal Width | |
| Dynamic Load Rating | 31900 lbf |
| Static Load Rating [Max] | 34400 lbf |
| Ball Dia. | |
| Bearing Design | |
| Bore B | |
| Cage Material | Steel |
| Collar No. | |
| Collar O. D. | |
| Collar Width | |
| Corner Radius [Min] | |
| Eccentric Collar Offset | |
| Fillet Radius | 2 mm |
| Flange O. D. [Max] | |
| Flange O. D. | |
| Flange Width [Max] | |
| Flange Width | |
| Flush Ground | |
| Housing Shoulder Diameter [Min] | |
| Housing Shoulder Diameter [Max] | |
| Housing Shoulder Diameter | |
| Industry Standard Part # | |
| Inner Ring O. D. | |
| Inner Ring Offset | |
| Inner Ring Width | 36 mm |
| Internal Design | |
| Limiting Speed | |
| Limiting Speed - Grease | 2600 rpm |
| Limiting Speed - Oil | 3200 rpm |
| Limiting Speed - Sealed | |
| Locking Device | No Locking Device |
| Lube Hole Center | |
| Lubricant | Oil Preservative |
| Misalignment Range | |
| No. in Set | Single Bearing |
| No. of Balls | |
| O. D. (B) | |
| Outer Ring | |
| Outer Ring Inner Diameter | |
| Outer Ring Size | |
| Peak Running Torque (mg-mm) | |
| Peak Starting Torque (mg-mm) | |
| Pre Lubricant | |
| Preload Amount | |
| Radial Internal Clearance | Normal |
| Radial Load Rating [Max] | |
| Radial Rigidity (lbf/µm) | |
| Reference Speed | |
| Seal O. D. | |
| Seal Protection Width | |
| Seating Washer | |
| Series | |
| Set Screw Offset | |
| Set Screw Size | |
| Shaft Shoulder Diameter [Min] | |
| Shaft Tolerance | |
| Snap Ring | No Snap Ring |
| Snap Ring O. D. | |
| Snap Ring Offset | |
| Snap Ring Thickness | |
| Special Features | |
| Stamping | |
| Static Thrust Load Rating [Max] | |
| Temperature Range [Min] | |
| Temperature Range [Max] | 450 °F |
| Use With | |
| Caution | Not to be used where only thrust loads are present |
|---|---|
| Applications |
|
| Features |
|
Looking for high-quality bearings at a great price? Look no further! We have the MRC 221M bearing in stock and ready to ship to you within 3 to 7 days. With over 500 pieces available, you can order as few as 1 piece at the unbeatable price of just $546.67 per piece. Don't miss out on this fantastic deal – get the bearings you need today and keep your machinery running smoothly. Read on to learn more and make your purchase now!
We specializes in providing MRC 221M Bearings for many years, MRC 221M has a large number of stock, a number of 221M Bearings MRC suppliers and brand agency cooperation to meet your different 32307-B quality and different brand needs. Get detailed parameters can be sent to e-mail inquiry, and if you have any questions about this 32307-B bearing.
Manufacturer MRC 221M bearing with high quality. MRC 221M Bearing - 221M MAX TYPE BALL BRGS. We has been built up long-term cooperation with MRC company, could make a bulk order of the bearings Which MRC 221M is the most authentic, must choose BEARING POWER, what a whole variety, reasonable price, guaranteed quality, prompt delivery via Global express..1986 In Global stock for delivery within 3 - 7 working days. Easy ways to get the answers you need.
