| Weight | 10.600 lb |
|---|---|
| OEM | OEM P/N |
| Manufacturer | Part Number |
|---|---|
| MRC | 7222PDU-BRZ |
| Manufacturer: | MRC Bearing Service |
|---|---|
| Weight: | 10. 6 lbs. |
| Product Name: | 7200-PD Light Series Duplex Ball Bearing |
| Description: | Single Row Angular Contact Bearing, 110 mm ID x 200 mm OD x 38 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set |
| Inch/Metric | Metric Bore |
|---|---|
| Bore Type | Round Bore |
| I. D. | 110 mm |
| O. D. [Min] | |
| O. D. [Max] | |
| O. D. | 200 mm |
| Width [Min] | |
| Width [Max] | |
| Width | 38 mm |
| Enclosure | Open |
| Rows of Balls | Single |
| Material | Steel |
| O. D. Type | Straight |
| Bearing Type | Angular Contact |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| Ambient Temperature Range [Min] | |
| Ambient Temperature Range [Max] | |
| Ball Material | Steel |
| Cage Type | Metal |
| Capacity | Standard Capacity |
| Contact Angle | 40° |
| Guide Type | |
| Lubrication | |
| Outer Ring Width | 38 mm |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Seal Material | None |
| Seal Type | Unsealed |
| Seal Width | |
| Dynamic Load Rating | 34400 lbf |
| Static Load Rating [Max] | 35100 lbf |
| Ball Dia. | |
| Bearing Design | |
| Bore B | |
| Cage Material | Brass/Bronze |
| Collar No. | |
| Collar O. D. | |
| Collar Width | |
| Corner Radius [Min] | |
| Eccentric Collar Offset | |
| Fillet Radius | 2 mm |
| Flange O. D. [Max] | |
| Flange O. D. | |
| Flange Width [Max] | |
| Flange Width | |
| Flush Ground | |
| Housing Shoulder Diameter [Min] | |
| Housing Shoulder Diameter [Max] | |
| Housing Shoulder Diameter | |
| Industry Standard Part # | |
| Inner Ring O. D. | |
| Inner Ring Offset | |
| Inner Ring Width | 38 mm |
| Internal Design | Universal Mounting |
| Limiting Speed | |
| Limiting Speed - Grease | 2600 rpm |
| Limiting Speed - Oil | 3600 rpm |
| Limiting Speed - Sealed | |
| Locking Device | No Locking Device |
| Lube Hole Center | |
| Lubricant | Oil Preservative |
| Misalignment Range | |
| No. in Set | Duplex Set |
| No. of Balls | |
| O. D. (B) | |
| Outer Ring | |
| Outer Ring Inner Diameter | |
| Outer Ring Size | |
| Peak Running Torque (mg-mm) | |
| Peak Starting Torque (mg-mm) | |
| Pre Lubricant | |
| Preload Amount | |
| Radial Internal Clearance | Normal |
| Radial Load Rating [Max] | |
| Radial Rigidity (lbf/µm) | |
| Reference Speed | |
| Seal O. D. | |
| Seal Protection Width | |
| Seating Washer | |
| Series | |
| Set Screw Offset | |
| Set Screw Size | |
| Shaft Shoulder Diameter [Min] | |
| Shaft Tolerance | |
| Snap Ring | No Snap Ring |
| Snap Ring O. D. | |
| Snap Ring Offset | |
| Snap Ring Thickness | |
| Special Features | |
| Stamping | |
| Static Thrust Load Rating [Max] | |
| Temperature Range [Min] | |
| Temperature Range [Max] | 450 °F |
| Use With | |
MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity is required. This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant. Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring. 7200-P Light Series bearing are available in bore sizes ranging from 10 mm to 200 mm. They are used with heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
Looking for high-quality bearings at a great price? Look no further! We have the MRC 7222PDU-BRZ bearing in stock and ready to ship to you within 3 to 7 days. With over 500 pieces available, you can order as few as 1 piece at the unbeatable price of just $828.66 per piece. Don't miss out on this fantastic deal – get the bearings you need today and keep your machinery running smoothly. Read on to learn more and make your purchase now!
We specializes in providing MRC 7222PDU-BRZ Bearings for many years, MRC 7222PDU-BRZ has a large number of stock, a number of 7222PDU-BRZ Bearings MRC suppliers and brand agency cooperation to meet your different 32307-B quality and different brand needs. Get detailed parameters can be sent to e-mail inquiry, and if you have any questions about this 32307-B bearing.
Manufacturer MRC 7222PDU-BRZ bearing with high quality. MRC 7222PDU-BRZ Bearing - 7222PDU-BRZ ANGULAR CONTACT BALL BRGS. We has been built up long-term cooperation with MRC company, could make a bulk order of the bearings Which MRC 7222PDU-BRZ is the most authentic, must choose BEARING POWER, what a whole variety, reasonable price, guaranteed quality, prompt delivery via Global express..1986 In Global stock for delivery within 3 - 7 working days. Easy ways to get the answers you need.
