AAM020025030 BUNTING Bearing

BUNTING AAM020025030

Min. Order: 1 Piece

Bearing Price

$8.68 (Price for reference only.)
IN STOCK 500+ pcs.with 3 to 7 days delivery time

Our email: [email protected]

Bearing Information
Weight0.079 lb
Bearing manufacturers
Manufacturer Part Number
BUNTING AAM020025030

Bunting Bearings Llc Bunting&Reg; AAM020025030

UPC: 717905218125 | UNSPSC: 31171509 | GTIN:
Bearings > Plain & Sleeve Bearings > Plain Sleeve & Flanged Bearings

Bunting® Plain Sleeve Bearing, 20 mm Bore, 25 mm OD, 30 mm Width, 10 to 220 deg F, 2000 psi Maximum, 1200 sfpm Maximum Velocity, 50000 Maximum PV, Sintered Bronze Bearing, Powder Coated


  • Smooth housing bore chamfers reduce bearing installation time and eliminate press fit loss due to the shearing of metal from the bearing OD
  • Tooling for production of stamped housings should be designed to provide a radius edge which will act as a lead and furnish clearance for flange fillet
  • Sleeve cylindrical journal bearings are commonly installed by press fitting the bearing into a housing with an insertion arbor
  • For housings rigid enough to withstand the press fit without appreciable distortion and for bearings with thickness approximately one eighth of the bearing OD
  • Proper running clearance for bearings depends to a great extent on the particular application
  • Only minimum recommended clearances for oil-impregnated bearings used with ground steel shafting
  • Oil-impregnated units should be stored in suitable containers using plastic bags, wax paper, metal, glass
  • Properly stored and protected against dust, oil-impregnated bearings retain their oil supply


  • Maximum PV Rating: 50000
  • Maximum Velocity: 1200 sfpm
  • Bearing Material: Sintered Bronze
  • Temperature Rating: 10 to 220 deg F
  • Maximum Pressure: 2000 psi
  • Bore Diameter: 20 mm
  • Outside Diameter: 25 mm
  • Finish: Powder Coated
  • Width: 30 mm


ANSI/ASQC Z1.4 | ASTM B438 | CBSA/NFFS/PTDA Association | CT-1000-K26 Metal Powder Industries Federation | MIL-B-5687D Military Specification | OSHA Standard 29 CFR 1910.1200 | SAE 841


90 Days